You are here: Concrete Reinforcing Products > Welded Mesh Reinforcing > Truss Mesh Reinforcement
General Intro

Truss Mesh Reinforcement

Truss mesh reinforcement is a welded wire forms designed for single way wall construction. The welded steel truss mesh is made with two side wires spot welded to a continuous diagonal formed cross wire forming a truss design.  Galvanized before weld or after weld processing for customers options. Reinforcing truss mesh are used to build the length of the masonry walls. They are embedded into the horizontal mortar joints for connecting of the construction.

 

Truss Mesh Welded Wire Truss Mesh Truss Mesh Reinforcement

Ladder Mesh Reinforcement is innovative product for the masonry wall building industry. The welding spots of Ladder Mesh Reinforcement warp wire and weft wire are on the same surface. It is widely used for reinforcing wall. And it can reduce cracking, increase lateral flexural strength, increase elasticity.

Masonry Wall Joint Truss Mesh Turss Mesh Packed
   

General Technical Information:
Weight:
2kg-10kg.
Usage: Masonry wall construction.
Materials Available: hot dipped galvanized steel, electro galvanized steel or stainless steel. Wire diameter: from 2.5mm to 6mm.
Truss Mesh Structure Width: 5cm, 10cm, 15cm, 20cm.
Structure Length: 3mm.
Wire Spacing: 40cm.

Truss welded wire mesh has five types of finishes:
Welded after hot dipped galvanized, Welded after electro galvanized, Welded before electro galvanized, Welded before hot dipped galvanized, Welded by stainless steel wire.

Package: carton/pallet/plastic wrapped.

Uses: Truss mesh is widely used for in Building Surface, Wall, Ground, Bridge bank and airport.

Need more information about Concreate Reinforcing Products? Contact us now.